Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Aygo
    4. : Loudspeaker

Toyota Aygo - Loudspeaker

Toyota Aygo (2014-2023 / Ab40, MK 2)
Replacement of the speakers of the Toyota Aygo
In this video tutorial, we will see how to disassemble and replace the front door speaker of the Toyota Aygo, following the instructions below. First, we open …read all…
Posted on 5 January 2024 by ScegliAuto
Toyota Aygo (2005-2014 / Ab10, MK 1)
How to replace the front speakers in the Toyota Aygo
If you want to improve the audio quality or need to replace the front speakers of your Toyota Aygo, here we will explain how to do it. First we remove the …read all…
Posted on 21 January 2024 by ScegliAuto
Toyota Aygo (2005-2014 / Ab10, MK 1)
Replace Toyota Aygo front speakers
The standard Toyota Aygo speakers are not of great quality: in fact, it is enough to raise the volume above level 20 to hear them croaking and therefore it is …read all…
Posted on 30 December 2023 by ScegliAuto
Toyota Aygo (2005-2014 / Ab10, MK 1)
How to replace Toyota Aygo speakers
The replacement of the speakers on this model of car is very simple to carry out and furthermore the size of the front is identical for both stations; for the …read all…
Posted on 4 October 2023 by ScegliAuto
Airbags (1) Loudspeaker (4) Shock absorbers (3) Antenna (1) Car stereo (12) Battery (4) Gearbox (4) Spark plugs (3) Bodywork (1) Key (5) Timing belt (1) V-belt (3) -board computer (5) Checks and maintenance (38) Dashboard (2) Headlight (9) Tail light (6) Air filter (7) Cabin air filter (4) Hand brake (1) Clutch (4) Light bulb (1) Headlight bulb (6) Rear light bulb (8) Antifreeze liquid (1) License plate light (4) Muffler (3) Starter motor (1) Engine oil (3) Door panel (4) Windshield (1) Front bumper (3) Rear bumper (4) Brake pads (3) Tires (10) Gear Shift Knob (1) Instrument cluster (8) Fuse box (20) Seat (2) Outside rearview mirror (6) Windscreen wipers (3) Steering rods (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos