Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Aygo
  6. : Cabin air filter

Toyota Aygo - Cabin air filter

Toyota Aygo (2005-2014 / Ab10, MK 1)
Replacement of the Toyota Aygo cabin air filter

These short and simple steps will show us how to replace the cabin air filter of the Toyota Aygo. First, we get on board the vehicle, on the passenger side, …read all…
Posted on 29 April 2024 by ScegliAuto
Toyota Aygo (2014-2023 / Ab40, MK 2)
How to replace the cabin air filter of the Toyota Aygo 2022.

To correctly and safely replace the cabin air filter located inside your second-generation Toyota Aygo (2022 model), simply follow these simple steps. First, …read all…
Posted on 23 November 2023 by ScegliAuto
Toyota Aygo (2014-2023 / Ab40, MK 2)
How to replace the pollen filter on a Toyota Aygo.

In this video tutorial, we can see how it is possible to replace the pollen filter on a Toyota Aygo by following a few simple steps: the first thing to do is …read all…
Posted on 25 May 2023 by ScegliAuto
Toyota Aygo (2005-2014 / Ab10, MK 1)
Cabin air filter replacement

The cabin air filter of the car model in question is located on the passenger side, immediately under the dashboard pocket which acts as a glove compartment; …read all…
Posted on 1 September 2023 by ScegliAuto

Airbags (1) Loudspeaker (4) Shock absorbers (3) Antenna (1) Car stereo (12) Battery (4) Gearbox (4) Spark plugs (3) Bodywork (1) Key (5) Timing belt (1) V-belt (3) -board computer (5) Checks and maintenance (38) Dashboard (2) Headlight (9) Tail light (6) Air filter (7) Cabin air filter (4) Hand brake (1) Clutch (4) Light bulb (1) Headlight bulb (6) Rear light bulb (8) Antifreeze liquid (1) License plate light (4) Muffler (3) Starter motor (1) Engine oil (3) Door panel (4) Windshield (1) Front bumper (3) Rear bumper (4) Brake pads (3) Tires (10) Gear Shift Knob (1) Instrument cluster (8) Fuse box (20) Seat (2) Outside rearview mirror (6) Windscreen wipers (3) Steering rods (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos