Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Cabin Filter in the Toyota Aygo MK1

Model: Toyota Aygo Ab10, MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Cabin air filter

See other generations:
Video tutorial

In this video, see how to change the cabin air filter in the Toyota Aygo MK1: you will need to work from the engine bay, so open the front bonnet and remove the clips securing the breather hose from the air filter and the intake hose, using a hose clamp pliers.

Move the clips on the filter cover, then remove the cover itself.

Disconnect the air intake hose from the air filter housing, and cover the throttle body with a cloth to prevent dust and dirt from entering. Remove the dirty filter and clean the housing of dirt and debris, replace the filter with a new one, ensuring the correct orientation, then close the cover, remove the cloth from the throttle body, replace the cover on the filter, and reattach the clips.

Operation complete.


Updated on 13 October 2026 by ScegliAuto


Related tutorials

How to replace the cabin air filter of the Toyota Aygo 2
How to replace the cabin air filter of the Toyota Aygo 2
Toyota Aygo (2014-2023 / Ab40, MK 2) In the following guide, we will help you complete the replacement of the air filter inside the cabin of your Toyota Aygo second edition. First of all…
Replacing the Cabin Air Filter on a Toyota Aygo
Replacing the Cabin Air Filter on a Toyota Aygo
Toyota Aygo (2021-2026 / MK 3, Aygo X) In this brief and simple guide, you will see how to replace the cabin air filter on a Toyota Aygo. First, get inside the vehicle and start by opening…
Replacing the Cabin Air Filter on the Toyota Aygo
Replacing the Cabin Air Filter on the Toyota Aygo
Toyota Aygo (2005-2014 / Ab10, MK 1) These brief and simple steps will show you how to replace the cabin air filter on the Toyota Aygo. First, get into the vehicle on the passenger side …

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos