Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Cabin Air Filter

Model: Toyota Aygo Ab10, MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Cabin air filter

See other generations:
Video tutorial

The cabin air filter for the car model in question is located on the passenger side, just below the dashboard pocket that serves as a glove compartment; the cover of the filter housing is an integral part of the filter itself: access the filter housing, grasp the tabs of the cap, and pull to remove it; ensure there are no dirt residues inside the filter housing and insert the new one (it is suggested to use the activated carbon type) until the plastic band that acts as a cap clicks into place; during the replacement of the cabin air filter, disinfect with a suitable antibacterial spray.


Updated on 19 February 2026 by ScegliAuto


Related tutorials

How to replace the cabin air filter of the Toyota Aygo 2
How to replace the cabin air filter of the Toyota Aygo 2
Toyota Aygo (2014-2023 / Ab40, MK 2) In the following guide, we will help you complete the replacement of the air filter inside the cabin of your Toyota Aygo second edition. First of all…
Replacing the Cabin Air Filter on the Toyota Aygo
Replacing the Cabin Air Filter on the Toyota Aygo
Toyota Aygo (2005-2014 / Ab10, MK 1) These brief and simple steps will show you how to replace the cabin air filter on the Toyota Aygo. First, get into the vehicle on the passenger side …
How to Replace the Air Filter on a Toyota Aygo
How to Replace the Air Filter on a Toyota Aygo
Toyota Aygo (2005-2014 / Ab10, MK 1) Before you can start, open the front bonnet of your Toyota Aygo. Begin by loosening the metal clip that secures the air filter housing hose, then dis…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos