Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Aygo
    4. : Engine oil

Toyota Aygo - Engine oil

Toyota Aygo (2005-2014 / Ab10, MK 1)
How to change the engine oil and oil filter of the Aygo.
Performing an oil and filter change on a Toyota Aygo is a simple operation that we will explain to you in complete autonomy through this video tutorial. The …read all…
Posted on 17 April 2023 by ScegliAuto
Toyota Aygo (2014-2023 / Ab40, MK 2)
How to do an oil change on Toyota Aygo
Run the engine for a few minutes so that the oil in circulation heats up and thus becomes more fluid and less dense: this will allow it to get out of its …read all…
Posted on 23 February 2024 by ScegliAuto
Toyota Aygo (2005-2014 / Ab10, MK 1)
How to replace the engine oil and filter on a toyota Aygo
Welcome to everyone, today we are going to see how to replace the oil filter and the engine oil on our Toyota Aygo. First we lift the car so that we can work …read all…
Posted on 21 November 2023 by ScegliAuto
Airbags (1) Loudspeaker (4) Shock absorbers (3) Antenna (1) Car stereo (12) Battery (4) Gearbox (4) Spark plugs (3) Bodywork (1) Key (5) Timing belt (1) V-belt (3) -board computer (5) Checks and maintenance (38) Dashboard (2) Headlight (9) Tail light (6) Air filter (7) Cabin air filter (4) Hand brake (1) Clutch (4) Light bulb (1) Headlight bulb (6) Rear light bulb (8) Antifreeze liquid (1) License plate light (4) Muffler (3) Starter motor (1) Engine oil (3) Door panel (4) Windshield (1) Front bumper (3) Rear bumper (4) Brake pads (3) Tires (10) Gear Shift Knob (1) Instrument cluster (8) Fuse box (20) Seat (2) Outside rearview mirror (6) Windscreen wipers (3) Steering rods (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos