Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Oil on Toyota Aygo

Model: Toyota Aygo Ab40, MK 2 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Engine oil

See other generations:
Video tutorial

Start the engine for a few minutes to warm up the circulating oil, making it more fluid and less viscous: this will allow it to drain more easily from its compartment. Lift the bonnet and secure it, then unscrew the oil filler cap. Raise the vehicle and get underneath the engine compartment: unscrew the oil drain bolt and collect the oil in a suitable container.

In the meantime, you can replace the oil filter as shown in the video. Once all the lubricant has drained, refill with the same quantity from the upper compartment: a 10W-40 oil is recommended.


Updated on 21 April 2026 by ScegliAuto


Related tutorials

Resetting the Tyre Pressure Warning Light on the Toyota Aygo X
Resetting the Tyre Pressure Warning Light on the Toyota Aygo X
Toyota Aygo (2021-2026 / MK 3, Aygo X) In this guide, we will see the main instructions that will allow you to reset the tyre pressure warning light on the Toyota Aygo X; before performing…
How to Reset the Oil Light on the Toyota Aygo X 2023
How to Reset the Oil Light on the Toyota Aygo X 2023
Toyota Aygo (2021-2026 / MK 3, Aygo X) In this guide, we will explain the various steps you need to follow to manually reset the oil light on your Toyota Aygo X (2023). First, start the in…
How to Reset the Service Light on a Toyota Aygo
How to Reset the Service Light on a Toyota Aygo
Toyota Aygo (2014-2023 / Ab40, MK 2) In this video tutorial, see how to reset the maintenance light that indicates the remaining engine oil life on a Toyota Aygo. This light should be re…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos