Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the oil filter and engine oil of the Toyota Aygo 1

Model: Toyota Aygo Ab10, MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Oil filter

See other generations:
Video tutorial

Today we will explain how to replace the engine oil filter and engine oil on a Toyota Aygo model 1. We unscrew the oil filler cap after lifting the front hood; using a jack we lift the car. The engine oil drain plug is located at the lowest point of the vehicle, so we position a container for the used engine oil and unscrew the oil pan bolt using a 15mm socket wrench.

While the engine oil is draining into the container, we use a 76/14-F socket to unscrew the oil filter.

Clean the filter seat and remove the container to tighten the oil pan bolt. Lubricate the gasket of the new filter with fresh oil and insert the filter into the housing.

Screw it in and lower the vehicle. Pour the oil into the tank and close the front hood.


Posted on 21 April 2025 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Filter on a Toyota Aygo
How to Change the Engine Oil and Filter on a Toyota Aygo
Toyota Aygo (2005-2014 / Ab10, MK 1) Welcome back everyone, today you will learn how to replace the oil filter and engine oil on your Toyota Aygo. First, raise the car to work more comfo…
How to replace the oil filter and engine oil of the Toyota Aygo 1
How to replace the oil filter and engine oil of the Toyota Aygo 1
Toyota Aygo (2005-2014 / Ab10, MK 1) Today we will explain how to independently replace the oil filter and engine oil on a Toyota Aygo model 1. Before starting the oil replacement, we ne…
How to Change the Engine Oil and Oil Filter on a Toyota Aygo
How to Change the Engine Oil and Oil Filter on a Toyota Aygo
Toyota Aygo (2005-2014 / Ab10, MK 1) Changing the oil and filter on a Toyota Aygo is a straightforward task that this video tutorial will guide you through to do independently. The first…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos