Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Aygo
    4. : Oil filter

Toyota Aygo - Oil filter

Oil Filter Toyota Aygo (2005-2014 / mk 1, ab 10)

Toyota Aygo (2005-2014 / MK 1, Ab10)
How to replace the oil filter and engine oil of the Toyota Aygo 1
Today we will explain how to independently replace the oil filter and engine oil on a Toyota Aygo model 1. Before starting the oil replacement, we need to open …Read all…
Posted on 15 May 2025 by ScegliAuto
Toyota Aygo (2005-2014 / MK 1, Ab10)
How to replace the oil filter and engine oil of the Toyota Aygo 1
Today we will explain how to replace the engine oil filter and engine oil on a Toyota Aygo model 1. We unscrew the oil filler cap after lifting the front hood; …Read all…
Posted on 21 April 2025 by ScegliAuto
Airbag (2) Speaker (4) Shocks (4) Antenna (1) Car stereo (9) Battery (6) Transmission (4) Spark plugs (6) Body (5) Key (12) Timing belt (2) V-belt (4) Onboard computer (4) Checks and maintenance (21) Dashboard (1) Brake rotors (1) Headlight (16) Tail light (12) Fog lights (1) Air filter (12) Cabin air filter (11) Oil filter (2) Parking brake (1) Clutch (7) Light bulb (1) Side marker bulb (1) Headlight bulb (12) Tail light bulb (11) Antifreeze coolant (1) Instrument panel light (1) License plate light (5) Handle (1) Exhaust muffler (3) Starter motor (1) Engine oil (3) Clock (21) Door trim panel (4) Windshield (1) Front bumper (4) Rear bumper (4) Brake pads (4) Shift knob (2) Car door (1) Instrument cluster (3) Fuse box (34) Seat (2) Crankshaft position sensor (1) Side mirror (9) Warning light – error code (4) (30) Tire pressure warning light (19) Service warning light (23) Fuel cap (9) Windshield wipers (5) Tie rods (1) Valve (1) Blower motor (1)

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos