Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Aygo
    4. : Muffler

Toyota Aygo - Muffler

Toyota Aygo (2005-2014 / Ab10, MK 1)
How do you replace the Toyota Aygo rear muffler?
It should be noted that the video created and commented on here is also compatible with the Citroen C1. It begins with disconnecting the terminals of the car's …read all…
Posted on 3 May 2023 by ScegliAuto
Toyota Aygo (2005-2014 / Ab10, MK 1)
Coma replaces the Toyota Aygo muffler
Changing the muffler would be a good habit to adopt to respect our environment, without having to spend absurd amounts or make enormous efforts, it is a simple …read all…
Posted on 18 September 2023 by ScegliAuto
Toyota Aygo (2005-2014 / Ab10, MK 1)
Muffler catalyst replacement
It is recommended that this repair be carried out with a cold engine first. Proceed with the disassembly of the front bumper by removing the pressure fasteners …read all…
Posted on 9 July 2023 by ScegliAuto
Airbags (1) Loudspeaker (4) Shock absorbers (3) Antenna (1) Car stereo (12) Battery (4) Gearbox (4) Spark plugs (3) Bodywork (1) Key (5) Timing belt (1) V-belt (3) -board computer (5) Checks and maintenance (38) Dashboard (2) Headlight (9) Tail light (6) Air filter (7) Cabin air filter (4) Hand brake (1) Clutch (4) Light bulb (1) Headlight bulb (6) Rear light bulb (8) Antifreeze liquid (1) License plate light (4) Muffler (3) Starter motor (1) Engine oil (3) Door panel (4) Windshield (1) Front bumper (3) Rear bumper (4) Brake pads (3) Tires (10) Gear Shift Knob (1) Instrument cluster (8) Fuse box (20) Seat (2) Outside rearview mirror (6) Windscreen wipers (3) Steering rods (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos