Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Exhaust on a Toyota Aygo

Model: Toyota Aygo MK 1, Ab10 - Years 2005-2014
Part: Exhaust muffler

Changing the exhaust is a good habit to adopt for the environment, without spending excessive amounts or making immense efforts. It is a simple and quick job that will leave you very satisfied.
There are three simple steps. The first is to unscrew and remove the clamp along the inlet pipe to the exhaust. The second is to remove both rubber supports for the exhaust from the right and left sides. Once done, the exhaust will be easily removable from underneath the car. Refit the new exhaust and pay attention to the connection with the clamp.

Updated on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Aygo (2005-2014 / MK 1, Ab10) Note that the video created and commented on here is also compatible with the Citroen C1. Start by disconnecting the battery terminals located in the…
Toyota Aygo (2021-2026 / MK 3, Aygo X) In this guide, we will explain the various steps you need to follow to manually reset the oil light on your Toyota Aygo X (2023). First, start the in…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos