Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Aygo
    4. : Door panel

Toyota Aygo - Door panel

Toyota Aygo (2005-2014 / Ab10, MK 1)
How do you remove the door panel of the Toyota Aygo?
Before starting the work, let's get the tools we need to complete it, namely a screwdriver and a rigid card. With the latter, we will unlock the small plastic …read all…
Posted on 3 August 2023 by ScegliAuto
Toyota Aygo (2014-2023 / Ab40, MK 2)
How to remove the door panel on Toyota Aygo
How do we remove the door panel (driver's side) of a Toyota Aygo? Let's see how to proceed with the disassembly. Before starting the disassembly work, let's …read all…
Posted on 27 October 2023 by ScegliAuto
Toyota Aygo (2005-2014 / Ab10, MK 1)
Removing the left driver's door panel on a Toyota Aygo
Let's remove the driver's left door panel on a Toyota Aygo, let's see how to proceed. Before starting the disassembly work, let's disconnect the battery …read all…
Posted on 9 October 2023 by ScegliAuto
Toyota Aygo (2005-2014 / Ab10, MK 1)
Removing the front door panel
Remove the cover on the side of the handle and unscrew the two sealing screws with a torx wrench. Remove the plastic retainers of the panel with the help of …read all…
Posted on 5 July 2023 by ScegliAuto
Airbags (1) Loudspeaker (4) Shock absorbers (3) Antenna (1) Car stereo (12) Battery (4) Gearbox (4) Spark plugs (3) Bodywork (1) Key (5) Timing belt (1) V-belt (3) -board computer (5) Checks and maintenance (38) Dashboard (2) Headlight (9) Tail light (6) Air filter (7) Cabin air filter (4) Hand brake (1) Clutch (4) Light bulb (1) Headlight bulb (6) Rear light bulb (8) Antifreeze liquid (1) License plate light (4) Muffler (3) Starter motor (1) Engine oil (3) Door panel (4) Windshield (1) Front bumper (3) Rear bumper (4) Brake pads (3) Tires (10) Gear Shift Knob (1) Instrument cluster (8) Fuse box (20) Seat (2) Outside rearview mirror (6) Windscreen wipers (3) Steering rods (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos