Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Front Door Panel

Model: Toyota Aygo MK 1, Ab10 - Years 2005-2014
Part: Door trim panel

Remove the cover on the side of the handle and unscrew the two retaining screws using a Torx spanner. Remove the plastic clips from the panel with the help of a trim tool and gently pull the panel away from the edges, sliding it carefully upwards. Remove the speaker, the handle cables, and the electrical connectors by disconnecting the plugs, taking care not to tear them. Refit the new panel, starting with the connection of the electrical cables. Position the panel upwards and then push it down until it clicks into place. Reconnect the cables, plugs, and screws.

Updated on 5 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Toyota Aygo (2014-2023 / Ab40, MK 2) How do you remove the door panel (driver's side) of a Toyota Aygo? Here's how to proceed with the disassembly. Before starting the disassembly work, …
Toyota Aygo (2005-2014 / MK 1, Ab10) Carry out the removal of the left driver's door panel on a Toyota Aygo, here’s how to proceed. Before starting the disassembly, disconnect the batter…
Toyota Aygo (2014-2023 / Ab40, MK 2) In this video tutorial, you will learn how to remove and replace the front door speaker of a Toyota Aygo, following the instructions below. First, op…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos