Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Speakers in a Toyota Aygo

Model: Toyota Aygo Ab10, MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Speaker

See other generations:
Video tutorial

If you want to improve audio quality or need to replace the front speakers in your Toyota Aygo, here’s how to do it. First, remove the speaker cover grilles using a plastic lever or a flathead screwdriver, undo the fixing bolts of the speakers with a 10mm socket, disconnect the connectors, and take out the old speakers.

If you have original replacements, you can directly reconnect the connectors and reassemble everything; if you have aftermarket speakers, you will need to cut the connectors on the car and crimp the fastons for the new speakers' connectors.

Once done, you can install the new speakers. At this point, try to refit the grilles; if you have trouble fitting them, you can trim the plastic edge on the inner side of the grille with pliers.


Updated on 9 April 2026 by ScegliAuto


Related tutorials

How to Replace the Speakers in a Toyota Aygo
How to Replace the Speakers in a Toyota Aygo
Toyota Aygo (2005-2014 / Ab10, MK 1) Replacing the speakers in this car model is very straightforward. The size of the front speakers is identical for both positions. For the rear speake…
Replacing Front Speakers on Toyota Aygo
Replacing Front Speakers on Toyota Aygo
Toyota Aygo (2005-2014 / Ab10, MK 1) The standard speakers in the Toyota Aygo are not of great quality: simply raising the volume above level 20 causes them to crackle, so it is advisabl…
Replacing the Speakers in a Toyota Aygo
Replacing the Speakers in a Toyota Aygo
Toyota Aygo (2014-2023 / Ab40, MK 2) In this video tutorial, you will learn how to remove and replace the front door speaker of a Toyota Aygo, following the instructions below. First, op…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos