Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Aygo
    4. : Front bumper

Toyota Aygo - Front bumper

Toyota Aygo (2005-2014 / Ab10, MK 1)
How to remove the Toyota Aygo headlights
Unscrew the screws in the lower part of the bumper with the 10 spanner. Now unscrew the side brackets with the Phillips screwdriver. Now remove the upper stops …read all…
Posted on 10 April 2024 by ScegliAuto
Toyota Aygo (2014-2023 / Ab40, MK 2)
Toyota Aygo front bumper removal
In today's video tutorial we will see how to remove the front bumper of a 2014 Toyota Aygo. First we open and lift the bonnet and we go to remove the plastic …read all…
Posted on 31 January 2024 by ScegliAuto
Toyota Aygo (2005-2014 / Ab10, MK 1)
Remove the rear bumper on Toyota Aygo
Disassembly of the broken bumper of the Toyota Aygo? Let's see how the vehicle is removed from behind. We open the tailgate, unscrew the locking pins located …read all…
Posted on 10 December 2023 by ScegliAuto
Airbags (1) Loudspeaker (4) Shock absorbers (3) Antenna (1) Car stereo (12) Battery (4) Gearbox (4) Spark plugs (3) Bodywork (1) Key (5) Timing belt (1) V-belt (3) -board computer (5) Checks and maintenance (38) Dashboard (2) Headlight (9) Tail light (6) Air filter (7) Cabin air filter (4) Hand brake (1) Clutch (4) Light bulb (1) Headlight bulb (6) Rear light bulb (8) Antifreeze liquid (1) License plate light (4) Muffler (3) Starter motor (1) Engine oil (3) Door panel (4) Windshield (1) Front bumper (3) Rear bumper (4) Brake pads (3) Tires (10) Gear Shift Knob (1) Instrument cluster (8) Fuse box (20) Seat (2) Outside rearview mirror (6) Windscreen wipers (3) Steering rods (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos