Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Aygo
    4. : Toyota Aygo front bumper removal

Toyota Aygo - Video tutorial

Model: Toyota Aygo MK 2, Ab40 - Years 2014-2023
Part: Front bumper
Operation: Toyota Aygo front bumper removal

In today's video tutorial we will see how to remove the front bumper of a 2014 Toyota Aygo. First we open and lift the bonnet and we go to remove the plastic clips that we find above the bumper; after which we remove the additional clips present on both sides of the fenders and begin to unclip our bumper from the sides. At this point we unscrew the screws that we find under the bumper and disconnect the electrical connector at the bottom, as shown in the video: we just have to unclip the bumper and remove it. Reverse the procedure for reassembly!


Posted on 31 January 2024 by ScegliAuto



How do you remove the Toyota Aygo headlight?
Toyota Aygo (2014-2023 / MK 2, Ab40) Removal of the Toyota Aygo headlight is done by first removing the bumper completely by unscrewing its fixing screws. These screws are located at the
How do you remove the Toyota Aygo rear bumper?
Toyota Aygo (2005-2014 / Ab10, MK 1) The removal of the rear bumper of the Toyota Aygo is done by opening the tailgate, so that the two screws that are positioned immediately below the t
How to remove the rear bumper of a Toyota Aygo?
Toyota Aygo (2005-2014 / Ab10, MK 1) Good morning, today's goal is to remove the rear bumper of our Toyota Aygo. Let's start by lifting the car with the jack. Then, we will need to caref

How do you replace the horn on the Citroà «n Berlingo?

In order to replace the horn on the Citroà «n Berlingo, the vehicle must be raised so that the screws that secure the left front wheel can be loosened and removed completely. Once this wheel has been removed, it will be possible to access the screws that secure the internal cover of the corresponding wheel arch: this will have to be detached and it will be possible to access the components inside, including the horn. This will need to be disconnected from its connector and removed from its holders, so that it can be replaced with a new spare part.

Watch the video!


by ScegliAuto

More videos