Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Headlights from a Toyota Aygo

Model: Toyota Aygo MK 1, Ab10 - Years 2005-2014
Part: Front bumper

Unscrew the screws located at the bottom of the bumper using a 10mm spanner. Now unscrew the side brackets with a cross screwdriver. Next, remove the upper clips and then the screws in the engine compartment. You can now pull off the bumper. Remove the front headlight, taking care to unscrew its mounting clips. Disconnect the power connectors from the housing. Lubricate the connectors and electronic contacts. After performing maintenance and replacement, you can proceed to reassemble the parts, following the operations in reverse.

Updated on 9 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Aygo (2014-2023 / Ab40, MK 2) In this tutorial, we will see how to remove the front headlights on a Toyota Aygo, a very simple and quick operation. First, ensure that the instrume…
Toyota Aygo (2005-2014 / MK 1, Ab10) In this tutorial, we can see how to replace the front headlights in the Toyota Aygo, a very simple and quick operation. First of all, make sure that …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos