Do it yourself
| ||||
|
Toyota Aygo - Video tutorial
Model: Toyota Aygo
Ab10, MK 1
- Years 2005-2014 In order to replace the Toyota Aygo headlight, you have to loosen the screws and remove the rivets that secure the front bumper: these are located in the lower part of the bumper, in the upper part under the hood and inside the wheel arches. In this way, it will be possible to detach the bumper and unscrew the bolts that secure the headlight: the latter can now be disconnected from the connector located at the rear and replaced with a new spare part. The new headlight will then have to be fixed to its housing with its screws, so that the bumper can be reinserted.
Posted on 16 June 2022 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsWhere are the fuses of the Volvo FH located?All the fuses of the Volvo FH are located inside the fuse box located in the vehicle cabin: in order to access the box it will be necessary to unhook the internal fixing clips that block the panel in the upper part of the dashboard, along its entire length. extension. Once this panel has been removed, it will be possible to access the fuses and replace them if necessary: here it will be possible to identify the fuses that take care of the operation of the windshield wipers, the cigarette lighter, the headlights, etc. In the vehicle manual each fuse is indicated with its amperage. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.034
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |