Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Aygo
  6. : Gearbox

Toyota Aygo - Gearbox

Toyota Aygo (2014-2023 / Ab40, MK 2)
How to replace the gearbox oil on the Toyota Aigo 1.0.

The transmission oil of the Toyota Aigo needs to be replaced according to the manufacturer's manual every 60,000 km or every 4 years. Today, with the help of …read all…
Posted on 27 January 2024 by ScegliAuto
Toyota Aygo (2014-2023 / Ab40, MK 2)
How to unlock the automatic transmission of the Toyota Aygo?

When the gear lever gets stuck in the parking position, we can unlock it using the dedicated button located between the gear lever and the handbrake lever. The …read all…
Posted on 18 December 2023 by ScegliAuto
Toyota Aygo (2005-2014 / Ab10, MK 1)
How to quickly fix the loose gearbox of the Toyota Aygo

In this video, we see how to fix a problem that can occur on the Toyota Aygo, as well as on the Citroen C1 and the Peugeot 107: the gear lever becomes loose, …read all…
Posted on 7 August 2023 by ScegliAuto
Toyota Aygo (2005-2014 / Ab10, MK 1)
Disassembly gearbox and clutch replacement on Toyota Aygo-Citroen C1 1.0 Petrol

In today's video we will see the instructions to be able to disassemble the gearbox and replace the clutch on a Toyota Aygo, but also on the Citroen C1 and …read all…
Posted on 11 January 2024 by ScegliAuto

Airbags (1) Loudspeaker (4) Shock absorbers (3) Antenna (1) Car stereo (12) Battery (4) Gearbox (4) Spark plugs (3) Bodywork (1) Key (5) Timing belt (1) V-belt (3) -board computer (5) Checks and maintenance (38) Dashboard (2) Headlight (9) Tail light (6) Air filter (7) Cabin air filter (4) Hand brake (1) Clutch (4) Light bulb (1) Headlight bulb (6) Rear light bulb (8) Antifreeze liquid (1) License plate light (4) Muffler (3) Starter motor (1) Engine oil (3) Door panel (4) Windshield (1) Front bumper (3) Rear bumper (4) Brake pads (3) Tires (10) Gear Shift Knob (1) Instrument cluster (8) Fuse box (20) Seat (2) Outside rearview mirror (6) Windscreen wipers (3) Steering rods (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos