Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Aygo
  6. : Disassembly gearbox and clutch replacement on Toyota Aygo-Citroen C1 1.0 Petrol

Toyota Aygo - Video tutorial

Model: Toyota Aygo Ab10, MK 1 - Years 2005-2014
Part: Gearbox
Operation: Disassembly gearbox and clutch replacement on Toyota Aygo-Citroen C1 1.0 Petrol

In today's video we will see the instructions to be able to disassemble the gearbox and replace the clutch on a Toyota Aygo, but also on the Citroen C1 and Peugeot 107, with 1.0 petrol engines. First we open the bonnet of our car and we go to disconnect the battery terminals, removing the latter; then we lift the car and remove the front wheels, disconnecting the front arms from the braking system. At this point we unhook the semi-shafts from the gearbox and unscrew the fastening bolts of the gearbox itself, in order to remove it; follow the video to the end for the disassembly of the clutch!


Posted on 11 January 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Aygo 2014-2023 - Why is the automatic gearbox of the Toyota Aygo 2 not working? Read Answer
    • Aygo 2014-2023 - What problems does the automatic transmission of the Toyota Aygo have? Read Answer
    • Aygo 2014-2023 - How many liters of oil does a Toyota Aygo automatic gearbox use? Read Answer
    • Aygo 2014-2023 - What problems does the Toyota Aygo automatic transmission have? Read Answer
    • Aygo 2014-2023 - What problems could the automatic transmission of the Toyota Aygo present? Read Answer
    • Aygo 2014-2023 - What are the problems of the Toyota Aygo gearbox? Read Answer
    • Aygo 2005-2014 - How many liters of manual transmission oil does the Toyota Aygo need? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos