Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery in the Toyota Aygo?

Model: Toyota Aygo Ab10, MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Battery

See other generations:
Video tutorial

In this tutorial we can see how to replace the battery in the Toyota Aygo, an extremely simple and quick operation. First of all, make sure that the instrument panel is turned off, so that you can work in complete safety.

Then open the hood, loosen the nut of the negative terminal with a 10mm wrench and disconnect it. Repeat the operation for the positive terminal, unscrew the bolt of the mounting bracket with a 13mm wrench and remove the battery from the housing. At this point, all that remains is to insert the replacement and reassemble everything following the reverse procedure.


Posted on 21 August 2025 by ScegliAuto


Related tutorials

How to replace the battery of the Toyota Aygo key
How to replace the battery of the Toyota Aygo key
Toyota Aygo (2005-2014 / Ab10, MK 1) In this article, we will show you how to replace the battery of the Toyota Aygo key. For this operation, you will need a flathead screwdriver and a C…
How to change the battery of a Toyota Aygo X key
How to change the battery of a Toyota Aygo X key
Toyota Aygo (2021-2026 / MK 3, Aygo X) In this very useful tutorial, we can see how to change the battery of a Toyota Aygo X key, a procedure also valid for other Toyota vehicles of the sa…
How to Replace the Battery in a Toyota Aygo?
How to Replace the Battery in a Toyota Aygo?
Toyota Aygo (2005-2014 / Ab10, MK 1) To replace the battery in a Toyota Aygo, open the bonnet to access the engine compartment and locate the battery, which is on the right side. To remo…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos