Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Unlock the Automatic Gearbox on a Toyota Aygo?

Model: Toyota Aygo Ab40, MK 2 - Years 2014-2023
Part: Transmission

When the gear lever is stuck in the park position, you can unlock it using the dedicated button located between the gear lever and the handbrake. The button is protected by a rubber cap and allows you to unlock the gearbox temporarily, enabling you to move the car, but a mechanic's intervention is still required to resolve the issue permanently. Therefore, take a flat screwdriver to remove the rubber cap protecting the button and press the button using the screwdriver. Move the gear lever from the park position to neutral, then release the button and replace the cap.

Updated on 3 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the clutch of the Toyota Aygo?
How do you replace the clutch of the Toyota Aygo?
Toyota Aygo (2005-2014 / MK 1, Ab10) In order to replace the clutch of the Toyota Aygo, you need to lift the car so that the left front wheel can be removed: after removing the wheel, yo…
Removing Gearbox and Replacing Clutch on Toyota Aygo-Citroen C1 1.0 Petrol
Removing Gearbox and Replacing Clutch on Toyota Aygo-Citroen C1 1.0 Petrol
Toyota Aygo (2005-2014 / MK 1, Ab10) In today's video, you will see instructions on how to remove the gearbox and replace the clutch on a Toyota Aygo, as well as on the Citroen C1 and Pe…
How to replace the cabin air filter of the Toyota Aygo 2
How to replace the cabin air filter of the Toyota Aygo 2
Toyota Aygo (2014-2023 / Ab40, MK 2) In the following guide, we will help you complete the replacement of the air filter inside the cabin of your Toyota Aygo second edition. First of all…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos