Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Aygo
    4. : Spark plugs

Toyota Aygo - Spark plugs

Toyota Aygo (2005-2014 / Ab10, MK 1)
Replacement of spark plugs for Toyota Aygo MK1
Let's see how to proceed to replace the spark plugs of the Toyota Aygo Mk1. We open the engine hood, release the clamp of the ventilation tube and, with a …read all…
Posted on 3 March 2024 by ScegliAuto
Toyota Aygo (2005-2014 / Ab10, MK 1)
How to replace spark plugs on Toyota Aygo
In this video tutorial we can see how to replace the Toyota Aygo spark plugs. The first thing to do is lift the bonnet and secure it with the appropriate rod. …read all…
Posted on 30 May 2023 by ScegliAuto
Toyota Aygo (2005-2014 / Ab10, MK 1)
How to remove the Toyota Aygo spark plugs
How to remove the Toyota Aygo spark plugs? Let's see in this video in detail how to proceed: pull the engine compartment opening lever located at the bottom …read all…
Posted on 22 October 2023 by ScegliAuto
Airbags (1) Loudspeaker (4) Shock absorbers (3) Antenna (1) Car stereo (12) Battery (4) Gearbox (4) Spark plugs (3) Bodywork (1) Key (5) Timing belt (1) V-belt (3) -board computer (5) Checks and maintenance (38) Dashboard (2) Headlight (9) Tail light (6) Air filter (7) Cabin air filter (4) Hand brake (1) Clutch (4) Light bulb (1) Headlight bulb (6) Rear light bulb (8) Antifreeze liquid (1) License plate light (4) Muffler (3) Starter motor (1) Engine oil (3) Door panel (4) Windshield (1) Front bumper (3) Rear bumper (4) Brake pads (3) Tires (10) Gear Shift Knob (1) Instrument cluster (8) Fuse box (20) Seat (2) Outside rearview mirror (6) Windscreen wipers (3) Steering rods (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos