|
Do it yourself
| |||
| ||||
How to change the spark plugs and air filter on a Toyota Aygo
Model: Toyota Aygo
Ab40, MK 2
- Years 2014-2023
Let's see how to replace spark plugs and air filter on a Toyota Aygo: let's start with the air filter. Open the hood and locate the air filter box, remove the four plastic clips that secure the cover, remove the three 10mm screws that hold the base of the container, remove the box (otherwise we won't be able to access the spark plugs) and remove the old filter. Clean the container thoroughly from dust and residue, and insert the new filter, paying attention to the mounting direction. Reposition the cover and close the box. Now let's move on to the spark plugs. Once the air filter is removed, we will have access to the three spark plug wells. Remove the connectors and loosen the plugs by unscrewing them counterclockwise. Install the new spark plugs by screwing them in clockwise (without forcing). Reconnect the electrical connectors and reassemble all the components that were previously disassembled, in reverse order.
Posted on 6 November 2025 by ScegliAuto
Video tutorial
Related tutorials
Toyota Aygo
(2005-2014 /
MK 1, Ab10)
In this video tutorial, you will see how to replace the spark plugs on a Toyota Aygo. First, lift the bonnet and secure it with the prop rod. Next, u…
Toyota Aygo
(2005-2014 /
MK 1, Ab10)
Here’s how to replace the spark plugs on a Toyota Aygo MK1. Open the bonnet, disconnect the breather hose clip and, using a suitable pliers, disconne…
Toyota Aygo
(2005-2014 /
MK 1, Ab10)
In this video, we will see how to replace the spark plugs on the Toyota Aygo 1: we open the hood and remove the clamps that secure the air filter ven…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.117
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |