|
Do it yourself
| |||
| ||||
How to replace the spark plugs on the Toyota Aygo 1
Model: Toyota Aygo
MK 1, Ab10
- Years 2005-2014
In this video, we will see how to replace the spark plugs on the Toyota Aygo 1: we open the hood and remove the clamps that secure the air filter vent tube, then remove the filter cover; disconnect the air intake tube and then cover the throttle body to prevent dirt from entering the system; disconnect the ignition coil connectors and spray the spark plug mounting bolts with WD-40, then unscrew the ignition coil bracket, which we will then remove; remove dirt from the spark plug wells with compressed air and then unscrew the spark plugs, which we will remove with a telescopic magnet; spread an anti-seize lubricant on the threads of the new spark plugs and on the terminals, high temperature grease, then install them in their seats and tighten them to 27 Nm. Insert the coils, connect the connector after spraying them with a specific spray, remove the cloth from the throttle body and put the air filter cover back in place; connect the intake tube and the job is done.
Posted on 4 May 2025 by ScegliAuto
Video tutorial
Related tutorials
Toyota Aygo
(2005-2014 /
MK 1, Ab10)
In this video tutorial, you will see how to replace the spark plugs on a Toyota Aygo. First, lift the bonnet and secure it with the prop rod. Next, u…
Toyota Aygo
(2005-2014 /
MK 1, Ab10)
How to remove the spark plugs from a Toyota Aygo? In this video, we detail the procedure: Pull the engine bay release lever located at the bottom lef…
Toyota Aygo
(2005-2014 /
MK 1, Ab10)
Here’s how to replace the spark plugs on a Toyota Aygo MK1. Open the bonnet, disconnect the breather hose clip and, using a suitable pliers, disconne…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.193
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |