Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Raise the Rear Seat Headrest on a Toyota Aygo

Model: Toyota Aygo MK 1, Ab10 - Years 2005-2014
Part: Seat

Before you can start, open the rear hatch of your Toyota Aygo. Begin by unclipping and removing the parcel shelf from the boot, then unclip the support cords connecting the parcel shelf to the boot lid. This will provide better access to the headrest adjustment button for the rear seat. Next, press and hold the adjustment button located at the bottom of the headrest support arm. While holding the button, raise the headrest to your desired height. Once you have completed this step, you can release the button, and you will be finished.

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Fold the Seats of the Toyota Aygo
How to Fold the Seats of the Toyota Aygo
Toyota Aygo (2005-2014 / MK 1, Ab10) Open the rear tailgate of the car, pull the small strap located on the seat back, and fold the backrest forward: let it rest on the seat base. Repeat…
How to Remove the Rear Bumper from a Toyota Aygo?
How to Remove the Rear Bumper from a Toyota Aygo?
Toyota Aygo (2005-2014 / MK 1, Ab10) Hello, today's goal is to remove the rear bumper from our Toyota Aygo. Start by lifting the car with the jack. Next, carefully search for and remove …
How to Remove the Spark Plugs from a Toyota Aygo
How to Remove the Spark Plugs from a Toyota Aygo
Toyota Aygo (2005-2014 / MK 1, Ab10) How to remove the spark plugs from a Toyota Aygo? In this video, we detail the procedure: Pull the engine bay release lever located at the bottom lef…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos