Do it yourself
Frequently asked questions about cars and motorcycles

How to Fold the Seats of the Toyota Aygo

Model: Toyota Aygo Ab10, MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Seat

See other generations:
Video tutorial

Open the rear tailgate of the car, pull the small strap located on the seat back, and fold the backrest forward: let it rest on the seat base. Repeat the same steps on the other rear seats (unless the seat is whole and not split) by performing the previously mentioned manoeuvres.

To fold the front seat for extra space: press the lever next to the seat and lower it (this depends on the model). Raise the seat backs after use.


Updated on 7 April 2026 by ScegliAuto


Related tutorials

Toyota Aygo (2005-2014 / Ab10, MK 1) This guide will show you how to open and close the boot of the Toyota Aygo. First, move to the rear of the vehicle and press the button located under…
Toyota Aygo (2021-2026 / MK 3, Aygo X) In this guide, we will explain the various steps you need to follow to manually reset the oil light on your Toyota Aygo X (2023). First, start the in…
Toyota Aygo (2005-2014 / Ab10, MK 1) To locate the fuse box inside your first series Toyota Aygo, you need to read the following guide and then follow the various steps described. First,…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos