Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Aygo
    4. : -board computer

Toyota Aygo - -board computer

Toyota Aygo (2005-2014 / Ab10, MK 1)
How to change the time on a Toyota Aygo
Thanks to this very short video guide, let's see how to adjust the time on a first generation Toyota Aygo, a model in production from 2005 to 2014. So to …read all…
Posted on 5 April 2023 by ScegliAuto
Toyota Aygo (2005-2014 / Ab10, MK 1)
How to change the time on the Toyota Aygo?
In order to change the time on the car, it is necessary to proceed as follows: access the driver's seat and turn on the ignition (do not turn on the engine), …read all…
Posted on 29 November 2022 by ScegliAuto
Toyota Aygo (2005-2014 / Ab10, MK 1)
How to change the timetable on the Toyota Aygo
To be able to change the time on the car it is necessary to follow the steps below: access the passenger compartment and sit in the driver's seat, turn on the …read all…
Posted on 15 November 2022 by ScegliAuto
Toyota Aygo (2014-2023 / Ab40, MK 2)
How to reset the pressure warning light on Toyota Aygo.
The first thing you need to do if the tire pressure warning light comes on is to go to a petrol station or a tire shop and check the cause of the tire …read all…
Posted on 15 October 2022 by ScegliAuto
Toyota Aygo (2014-2023 / Ab40, MK 2)
How to reset the Toyota Aygo service light
If the service warning light appears on the display of your Toyota Aygo even though you have already carried out routine maintenance, do not worry because you …read all…
Posted on 2 April 2024 by ScegliAuto
Airbags (1) Loudspeaker (4) Shock absorbers (3) Antenna (1) Car stereo (12) Battery (4) Gearbox (4) Spark plugs (3) Bodywork (1) Key (5) Timing belt (1) V-belt (3) -board computer (5) Checks and maintenance (38) Dashboard (2) Headlight (9) Tail light (6) Air filter (7) Cabin air filter (4) Hand brake (1) Clutch (4) Light bulb (1) Headlight bulb (6) Rear light bulb (8) Antifreeze liquid (1) License plate light (4) Muffler (3) Starter motor (1) Engine oil (3) Door panel (4) Windshield (1) Front bumper (3) Rear bumper (4) Brake pads (3) Tires (10) Gear Shift Knob (1) Instrument cluster (8) Fuse box (20) Seat (2) Outside rearview mirror (6) Windscreen wipers (3) Steering rods (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos