Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Aygo
    4. : Windscreen wipers

Toyota Aygo - Windscreen wipers

Toyota Aygo (2014-2023 / Ab40, MK 2)
How do you replace the windshield wiper blades of the Toyota Aygo?
In order to replace the windshield wipers of the Toyota Aygo, you need to lift them up so they are not in contact with the windshield: once the wipers are …read all…
Posted on 2 March 2024 by ScegliAuto
Toyota Aygo (2005-2014 / Ab10, MK 1)
How to replace the wiper blade on Toyota Aygo
If we want to proceed with the replacement of the wiper blades on this car we can find the simple instructions given in this description below and also in the …read all…
Posted on 1 May 2023 by ScegliAuto
Toyota Aygo (2005-2014 / Ab10, MK 1)
How to replace the wiper blades in the Toyota Aygo?
This short but effective video tutorial illustrates all the steps we must follow to correctly remove and replace the wiper blades in our Toyota Aygo. First, we …read all…
Posted on 19 March 2024 by ScegliAuto
Airbags (1) Loudspeaker (4) Shock absorbers (3) Antenna (1) Car stereo (12) Battery (4) Gearbox (4) Spark plugs (3) Bodywork (1) Key (5) Timing belt (1) V-belt (3) -board computer (5) Checks and maintenance (38) Dashboard (2) Headlight (9) Tail light (6) Air filter (7) Cabin air filter (4) Hand brake (1) Clutch (4) Light bulb (1) Headlight bulb (6) Rear light bulb (8) Antifreeze liquid (1) License plate light (4) Muffler (3) Starter motor (1) Engine oil (3) Door panel (4) Windshield (1) Front bumper (3) Rear bumper (4) Brake pads (3) Tires (10) Gear Shift Knob (1) Instrument cluster (8) Fuse box (20) Seat (2) Outside rearview mirror (6) Windscreen wipers (3) Steering rods (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos