Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wiper Blades on a Toyota Aygo?

Model: Toyota Aygo Ab10, MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Windshield wipers

See other generations:
Video tutorial

This short but effective video tutorial illustrates all the steps you need to follow to correctly remove and replace the wiper blades on your Toyota Aygo. First, lift the wiper arm away from the glass surface. Once done, press the clip and slide off the old blade using a flat screwdriver.

At this point, you can install the new blade and return the wiper arm to its original position. Finally, carefully remove the protective sticker from the blade and check its proper operation.


Updated on 30 April 2026 by ScegliAuto


Related tutorials

How to Replace the Wiper Blades on a Toyota Aygo 1
How to Replace the Wiper Blades on a Toyota Aygo 1
Toyota Aygo (2005-2014 / Ab10, MK 1) .. Let's see how to replace the wiper blades on a Toyota Aygo 1: lift the wiper arm away from the windscreen until.. …
How to Replace the Wiper Blades on the Toyota Aygo?
How to Replace the Wiper Blades on the Toyota Aygo?
Toyota Aygo (2014-2023 / Ab40, MK 2) To replace the wiper blades on the Toyota Aygo, lift the blades so they are not in contact with the windscreen: once the blades are lifted, you can t…
How to Replace the Wiper Blades on a Toyota Aygo
How to Replace the Wiper Blades on a Toyota Aygo
Toyota Aygo (2005-2014 / Ab10, MK 1) If you want to replace the wiper blades on this vehicle, you can find simple instructions below and in the video. First, lift the wiper arm, and to r…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos