Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Wiper Blades on a Toyota Aygo 1

Model: Toyota Aygo MK 1, Ab10 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Windshield wipers

Video tutorial

Let's see how to replace the wiper blades on a Toyota Aygo 1: lift the wiper arm away from the windscreen until it stops. Remove the old blade by pressing the retaining clip.

If necessary, use a flat screwdriver to assist in removing the blade from the arm. Be careful not to let the wiper arm snap back against the windscreen. Install the new blade and gently lower the arm onto the windscreen; avoid touching the rubber part to prevent damaging the graphite coating.

Ensure the rubber strip adheres well to the glass along its entire length; repeat on the other side and test functionality by operating the wiper.


Posted on 12 October 2026 by ScegliAuto


Related tutorials

Toyota Aygo (2014-2023 / MK 2, Ab40) To replace the wiper blades on the Toyota Aygo, lift the blades so they are not in contact with the windscreen: once the blades are lifted, you can t…
Toyota Aygo (2005-2014 / MK 1, Ab10) This short but effective video tutorial illustrates all the steps you need to follow to correctly remove and replace the wiper blades on your Toyota …
Toyota Aygo (2005-2014 / MK 1, Ab10) In this brief yet useful video tutorial, you will see the step-by-step procedure to replace the wiper blade on a Toyota Aygo, first generation model …

How to Open the Fuel Flap and Cap on an MG HS

This guide will show you how to open the fuel flap and cap on an MG HS in simple steps. To open the fuel flap, ensure the vehicle is unlocked; then press on the edge of the flap to open it, as shown in the video. Next, unscrew the fuel cap counterclockwise to refuel at the pump; once finished, screw the cap back on until it clicks, and finally close the fuel flap!

Watch the video!


by ScegliAuto

More videos