Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the wiper blades on the Toyota Aygo 1

Model: Toyota Aygo Ab10, MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Windshield wipers

See other generations:
Video tutorial

In this video we see how to replace the wiper blades on the Toyota Aygo 1: lift the front wiper blade and press the clip that holds the brush; in this way we can remove it, taking it off gently from the holding hook. Now wrap the metal hook in a soft cloth, so that, resting it on the glass, it cannot scratch it, since the spring is under quite a strong tension.

Install the new brush, carefully positioning the wiper arm on the windshield. Snap the clip and make sure the spring is securely closed; it is better not to touch the rubber of the brush, to avoid damage to the graphite coating.

Now all that remains is to carry out the test.


Posted on 22 December 2024 by ScegliAuto


Related tutorials

How to Replace the Wiper Blades on the Toyota Aygo?
How to Replace the Wiper Blades on the Toyota Aygo?
Toyota Aygo (2014-2023 / Ab40, MK 2) To replace the wiper blades on the Toyota Aygo, lift the blades so they are not in contact with the windscreen: once the blades are lifted, you can t…
How to Reset the Oil Light on the Toyota Aygo X 2023
How to Reset the Oil Light on the Toyota Aygo X 2023
Toyota Aygo (2021-2026 / MK 3, Aygo X) In this guide, we will explain the various steps you need to follow to manually reset the oil light on your Toyota Aygo X (2023). First, start the in…
How to Know the Fuse Diagrams of a Toyota Aygo
Toyota Aygo (2014-2023 / Ab40, MK 2) This video shows the fuse assignment diagrams for a Toyota Aygo. The first fuse box can be found inside the vehicle's cabin and contains fuses assign…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos