Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Wiper Blade on Toyota Aygo

Model: Toyota Aygo Ab10, MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Windshield wipers

See other generations:
Video tutorial

In this brief yet useful video tutorial, you will see the step-by-step procedure to replace the wiper blade on a Toyota Aygo, first generation model produced from 2005 to 2014. This is a very simple operation that anyone can do. Start by lifting the wiper arm, then lift the upper clip securing the blade.

Once done, gently pull the blade back to remove it from the arm. Finally, insert a new wiper blade following the reverse procedure to complete the job.


Updated on 7 October 2026 by ScegliAuto


Related tutorials

How to Replace the Wiper Blades on the Toyota Aygo?
How to Replace the Wiper Blades on the Toyota Aygo?
Toyota Aygo (2014-2023 / Ab40, MK 2) To replace the wiper blades on the Toyota Aygo, lift the blades so they are not in contact with the windscreen: once the blades are lifted, you can t…
How to replace the wiper blades on the Toyota Aygo 1
How to replace the wiper blades on the Toyota Aygo 1
Toyota Aygo (2005-2014 / Ab10, MK 1) In this video we see how to replace the wiper blades on the Toyota Aygo 1: lift the front wiper blade and press the clip that holds the brush; in thi…
How to replace the cabin air filter of the Toyota Aygo 2
How to replace the cabin air filter of the Toyota Aygo 2
Toyota Aygo (2014-2023 / Ab40, MK 2) In the following guide, we will help you complete the replacement of the air filter inside the cabin of your Toyota Aygo second edition. First of all…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos