Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Aygo
    4. : Interior blower

Toyota Aygo - Interior blower

Toyota Aygo (2005-2014 / Ab10, MK 1)
How do I replace the Toyota Aygo interior fan?
In order to replace the Toyota Aygo passenger compartment fan, you need to loosen all the screws that secure the panel of the upper part of the dashboard, so …read all…
Posted on 28 September 2022 by ScegliAuto
Airbags (1) Loudspeaker (4) Shock absorbers (3) Antenna (1) Car stereo (12) Battery (4) Gearbox (4) Spark plugs (3) Bodywork (1) Key (5) Timing belt (1) V-belt (3) -board computer (5) Checks and maintenance (38) Dashboard (2) Headlight (9) Tail light (6) Air filter (7) Cabin air filter (4) Hand brake (1) Clutch (4) Light bulb (1) Headlight bulb (6) Rear light bulb (8) Antifreeze liquid (1) License plate light (4) Muffler (3) Starter motor (1) Engine oil (3) Door panel (4) Windshield (1) Front bumper (3) Rear bumper (4) Brake pads (3) Tires (10) Gear Shift Knob (1) Instrument cluster (8) Fuse box (20) Seat (2) Outside rearview mirror (6) Windscreen wipers (3) Steering rods (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos