Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan on a Toyota Aygo?

Model: Toyota Aygo Ab10, MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Blower motor

See other generations:
Video tutorial

To replace the cabin fan on a Toyota Aygo, loosen all the screws securing the upper dashboard panel so it can be completely detached. You will also need to remove the panels around the steering column and the front of the radio.

Once the central dashboard panel is removed, you can access the fan: it must be removed from its housing by unscrewing the fastening screws and disconnecting the appropriate power cables. This way, you can insert the new fan, securing and connecting it properly.


Updated on 16 June 2026 by ScegliAuto


Related tutorials

How to replace the cabin air filter of the Toyota Aygo 2
How to replace the cabin air filter of the Toyota Aygo 2
Toyota Aygo (2014-2023 / Ab40, MK 2) In the following guide, we will help you complete the replacement of the air filter inside the cabin of your Toyota Aygo second edition. First of all…
Where are the fuses located in the Toyota Aygo?
Where are the fuses located in the Toyota Aygo?
Toyota Aygo (2005-2014 / Ab10, MK 1) All the fuses in the Toyota Aygo are contained within the designated fuse boxes located inside the vehicle: there are two in this type of vehicle, on…
Where are the Fuses Located in the Toyota Aygo?
Where are the Fuses Located in the Toyota Aygo?
Toyota Aygo (2005-2014 / Ab10, MK 1) The specific fuse boxes installed inside the Toyota Aygo serve to contain the fuses responsible for the operation of the devices mounted on the vehic…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos