Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Bumper on a Toyota Aygo

Model: Toyota Aygo MK 1, Ab10 - Years 2005-2014
Part: Front bumper

Is the rear bumper of your Toyota Aygo broken? Here’s how to remove it from the back of the vehicle. Open the boot, unscrew the securing bolts located at the top of the bumper using a screwdriver. Unscrew the screws at the bottom of the bumper, then remove the screws located at the sides of the wheel arch liners. Once all securing screws are removed, you can detach the bumper: grip the bumper with your hands and pull it away from the bodywork (disconnect any power cables if necessary). Fit the new rear bumper onto the bodywork (screw in the screws and reconnect the clips).

Updated on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Bumper of the Toyota Aygo?
Toyota Aygo (2005-2014 / MK 1, Ab10) To remove the rear bumper of the Toyota Aygo, open the boot to access the two screws located directly beneath the rear lights. Once these screws are …
How to Remove the Rear Bumper from a Toyota Aygo?
How to Remove the Rear Bumper from a Toyota Aygo?
Toyota Aygo (2005-2014 / MK 1, Ab10) Hello, today's goal is to remove the rear bumper from our Toyota Aygo. Start by lifting the car with the jack. Next, carefully search for and remove …
How to Remove the Front Headlight of the Toyota Aygo?
How to Remove the Front Headlight of the Toyota Aygo?
Toyota Aygo (2005-2014 / MK 1, Ab10) To remove the front headlight on the Toyota Aygo, first, remove the front bumper completely by unscrewing the relevant fixing screws. These screws ar…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos