Do it yourself
| ||||
|
Toyota Aygo - Video tutorial
Model: Toyota Aygo
Ab40, MK 2
- Years 2014-2023 In order to remove the rear bumper of the Toyota Aygo, it is necessary to lift the boot lid and loosen the torx screws located next to the headlight assembly, in the upper and lower part. Next, it will be necessary to loosen the screws located in the upper part of the bumper, immediately below the gasket. At this point, it will be possible to release the bumper retaining clips inside the wheel arches and in the lower part of the bumper. This can now be disconnected, after having disconnected its connector. The new bumper can then be installed by connecting it to the connector and securing it with special clips and bolts.
Posted on 4 March 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow do you replace the battery of the BMW R 1250 GS?In order to replace the battery of the BMW R 1250 GS it is necessary to loosen the bolts that secure the casing positioned on the left side of the bike, so that its cover can be removed. Once this has been removed, you will be able to access the components below, including the battery. The latter must be removed from its housing by disconnecting the power cables and unscrewing the appropriate fixing bolts. In this way it will be possible to insert a new battery, properly fixing it and connecting it to the relative cables, covering everything with the casing. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.036
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |