Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the oil filter and engine oil of the Toyota Aygo 1

Model: Toyota Aygo MK 1, Ab10 - Years 2005-2014
Part: Oil filter

Today we will explain how to independently replace the oil filter and engine oil on a Toyota Aygo model 1. Before starting the oil replacement, we need to open the front hood and remove the oil filler cap to increase the oil flow during the change, but first we insert a pre-change detergent. Start the vehicle for 5 minutes so that the oil is slightly warm, add the product and let it act for 10/15 minutes, lift the car and once the time has passed, remove the oil pan bolt to let the liquid drain out. Remove the bolt on the oil filter box to remove it. Grease the new filter and insert it inside, and tighten the box bolt. Tighten the oil pan bolt and lower the vehicle. Pour about 4 liters of oil into the oil tank and finally close the front hood.

Posted on 15 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil and Oil Filter on a Toyota Aygo
How to Change the Engine Oil and Oil Filter on a Toyota Aygo
Toyota Aygo (2005-2014 / MK 1, Ab10) Changing the oil and filter on a Toyota Aygo is a straightforward task that this video tutorial will guide you through to do independently. The first…
How to Change the Engine Oil and Filter on a Toyota Aygo
How to Change the Engine Oil and Filter on a Toyota Aygo
Toyota Aygo (2005-2014 / MK 1, Ab10) Welcome back everyone, today you will learn how to replace the oil filter and engine oil on your Toyota Aygo. First, raise the car to work more comfo…
How to replace the oil filter and engine oil of the Toyota Aygo 1
How to replace the oil filter and engine oil of the Toyota Aygo 1
Toyota Aygo (2005-2014 / MK 1, Ab10) Today we will explain how to replace the engine oil filter and engine oil on a Toyota Aygo model 1. We unscrew the oil filler cap after lifting the f…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos