Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Oil Filter on a Toyota Aygo

Model: Toyota Aygo Ab10, MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Engine oil

See other generations:
Video tutorial

Changing the oil and filter on a Toyota Aygo is a straightforward task that this video tutorial will guide you through to do independently. The first step is to remove the oil filler cap to insert a pre-change cleaner, then lift the vehicle as the oil sump is located underneath.

Using a socket wrench, remove the bolt and allow the old oil to drain out. Once there is no more oil in the sump, you can remove the filter. To remove the oil filter, first take off the air intake duct, as shown in the video.

After completing the filter removal, replace it with a new one. Then, lower the car and add the new oil.


Updated on 22 July 2026 by ScegliAuto


Related tutorials

How to replace the oil filter and engine oil of the Toyota Aygo 1
How to replace the oil filter and engine oil of the Toyota Aygo 1
Toyota Aygo (2005-2014 / Ab10, MK 1) Today we will explain how to replace the engine oil filter and engine oil on a Toyota Aygo model 1. We unscrew the oil filler cap after lifting the f…
How to replace the oil filter and engine oil of the Toyota Aygo 1
How to replace the oil filter and engine oil of the Toyota Aygo 1
Toyota Aygo (2005-2014 / Ab10, MK 1) Today we will explain how to independently replace the oil filter and engine oil on a Toyota Aygo model 1. Before starting the oil replacement, we ne…
How to Change the Engine Oil and Filter on a Toyota Aygo
How to Change the Engine Oil and Filter on a Toyota Aygo
Toyota Aygo (2005-2014 / Ab10, MK 1) Welcome back everyone, today you will learn how to replace the oil filter and engine oil on your Toyota Aygo. First, raise the car to work more comfo…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos