Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Cabin Filter Located in the Toyota Aygo?

Model: Toyota Aygo Ab10, MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Cabin air filter

See other generations:
Video tutorial

In this video, you will see where the cabin filter is located in the Toyota Aygo and how to proceed if you need to replace it, a very simple and quick operation. As shown, the filter is positioned on the passenger side, precisely at the junction between the centre console and the dashboard.

To replace it, go underneath the dashboard, unlock the retaining clip of the cover, and remove it from the housing. Once done, clean any dirt residue present, insert the replacement, and follow the reverse procedure.


Updated on 29 October 2026 by ScegliAuto


Related tutorials

Where is the coolant reservoir located in the Toyota Aygo?
Where is the coolant reservoir located in the Toyota Aygo?
Toyota Aygo (2005-2014 / Ab10, MK 1) In this video, you can see where the coolant reservoir is located in the Toyota Aygo, useful in case you need to replace it or top it up. As shown, i…
Where is the Fuse Box Located on the Toyota Aygo
Where is the Fuse Box Located on the Toyota Aygo
Toyota Aygo (2005-2014 / Ab10, MK 1) If you are unsure where the fuse box is located in your Toyota Aygo Mk1 (2005-2014), don't worry as this mini guide provides all the necessary inform…
Where to Find the OBD Port on the Toyota Aygo
Toyota Aygo (2014-2023 / Ab40, MK 2) The OBD port is a small yet important component located inside the cabin of your Toyota Aygo. It allows you to directly connect a diagnostic tool to …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos