Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Bulbs on a Toyota Aygo, Specifically the Dipped Beam Bulbs

Model: Toyota Aygo Ab10, MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Headlight

See other generations:
Video tutorial

This guide shows how to replace the bulbs on a Toyota Aygo, specifically the H4 dipped beam bulbs. To carry out the replacement, open the bonnet after securing the vehicle and disconnect the electrical connector of the relevant bulb.

At this point, detach the plastic cover that reveals the dipped beam bulb holder. To replace the dipped beam bulb, detach the spring clip and extract the bulb.

The other bulbs are replaced in the same way, by disconnecting the electrical cable and rotating the bulb holder counter-clockwise.


Updated on 23 April 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Headlamp Bulbs on a Toyota Aygo?
How to Replace the Rear Headlamp Bulbs on a Toyota Aygo?
Toyota Aygo (2014-2023 / Ab40, MK 2) As shown in this tutorial, replacing the rear headlamp bulbs on a Toyota Aygo is an extremely simple and quick task. First, to work safely, ensure th…
How to Replace the Rear Light Bulbs on a Toyota Aygo
How to Replace the Rear Light Bulbs on a Toyota Aygo
Toyota Aygo (2005-2014 / Ab10, MK 1) Do you need to replace the rear light bulbs on a Toyota Aygo? In this video, see how to replace them: open the boot lid, unscrew the screws located a…
Removing the Rear Light and Bulb on Toyota Aygo 2
Removing the Rear Light and Bulb on Toyota Aygo 2
Toyota Aygo (2014-2023 / Ab40, MK 2) Follow these instructions to remove the rear light and replace the bulbs on a second-generation Toyota Aygo. First, open the boot and remove the scre…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos