Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Light and Bulb on Toyota Aygo 2

Model: Toyota Aygo Ab40, MK 2 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tail light

See other generations:
Video tutorial

Follow these instructions to remove the rear light and replace the bulbs on a second-generation Toyota Aygo. First, open the boot and remove the screws from the plastic side cover. Then, unscrew the fixing screws of the light, located on its sides, as shown in the video.

Next, disconnect the electrical connector from the back of the light, removing it. Now, release the tabs of the light to access the bulb holder and replace any bulbs if necessary. Finally, reassemble everything!


Updated on 12 April 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on a Toyota Aygo
How to Replace the Front Headlamp Bulb on a Toyota Aygo
Toyota Aygo (2014-2023 / Ab40, MK 2) To replace the front headlamp bulb on a Toyota Aygo, open the bonnet to access the interior of the engine compartment: here you will find the connect…
How to replace the rear tail light bulb of a Toyota Aygo
How to replace the rear tail light bulb of a Toyota Aygo
Toyota Aygo (2014-2023 / Ab40, MK 2) In the video, we can see the procedure to follow in order to change the rear light bulb of a Toyota Aygo. Before starting, make sure you have the nec…
How to Replace the Rear Headlamp Bulb on a Toyota Aygo
How to Replace the Rear Headlamp Bulb on a Toyota Aygo
Toyota Aygo (2005-2014 / Ab10, MK 1) If you need to replace the rear headlamp bulb on this vehicle, follow the instructions provided below and in the tutorial video. First, open the boot…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos