Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlamp Bulb on a Toyota Aygo

Model: Toyota Aygo Ab10, MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Tail light bulb

See other generations:
Video tutorial

If you need to replace the rear headlamp bulb on this vehicle, follow the instructions provided below and in the tutorial video. First, open the boot and locate the light unit where the bulb needs changing.

Remove the trim on the side of the boot to access the nut that needs to be undone at the back. Once the nut is removed, you can extract the headlamp from the outside by first disconnecting the electrical connector.

Then, unclip the bulb holder and proceed to replace the individual bulb. Reattach the bulb holder to the headlamp and refit it to the bodywork.


Updated on 14 July 2026 by ScegliAuto


Related tutorials

How to change the rear bulb of the Toyota Aygo?
Toyota Aygo (2014-2023 / Ab40, MK 2) The procedure to replace the rear lamp bulb in the Toyota Aygo is quite simple. Open the boot of the car and remove the clips and screws, then take o…
How to Replace the Front Headlight Bulb on the Toyota Aygo
How to Replace the Front Headlight Bulb on the Toyota Aygo
Toyota Aygo (2005-2014 / Ab10, MK 1) In this short and simple guide, you will learn how to remove and replace the front headlight bulb (dipped and main beam) on the Toyota Aygo. First, o…
Removing the Rear Light and Bulb on Toyota Aygo 2
Removing the Rear Light and Bulb on Toyota Aygo 2
Toyota Aygo (2014-2023 / Ab40, MK 2) Follow these instructions to remove the rear light and replace the bulbs on a second-generation Toyota Aygo. First, open the boot and remove the scre…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos