Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the rear bulb of the Toyota Aygo?

Model: Toyota Aygo Ab40, MK 2 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tail light bulb

See other generations:
This video is currently unavailable

The procedure to replace the rear lamp bulb in the Toyota Aygo is quite simple. Open the boot of the car and remove the clips and screws, then take off the boot cover.

Using a 10 mm spanner, loosen the nut located behind the rear lamp. Now that the lamp is free, pull it towards you and disconnect the connector.

Very carefully, open the lamp and start unscrewing the bulbs you intend to replace. Fit the new ones and reverse the procedure to reassemble what you have disassembled.


Updated on 29 April 2026 by ScegliAuto


Related tutorials

How to Change the Bulb in the Toyota Aygo
How to Change the Bulb in the Toyota Aygo
Toyota Aygo (2005-2014 / Ab10, MK 1) In this video tutorial, you can see how to replace the bulb in the Toyota Aygo by following a few simple steps that will guide you through the proces…
How to replace the rear tail light bulb of a Toyota Aygo
How to replace the rear tail light bulb of a Toyota Aygo
Toyota Aygo (2014-2023 / Ab40, MK 2) In the video, we can see the procedure to follow in order to change the rear light bulb of a Toyota Aygo. Before starting, make sure you have the nec…
How to Replace the Rear Headlamp Bulb on a Toyota Aygo
How to Replace the Rear Headlamp Bulb on a Toyota Aygo
Toyota Aygo (2005-2014 / Ab10, MK 1) If you need to replace the rear headlamp bulb on this vehicle, follow the instructions provided below and in the tutorial video. First, open the boot…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos