Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the clutch on the Toyota Aygo?

Model: Toyota Aygo Ab10, MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Clutch

See other generations:
Video tutorial

To replace the clutch on the Toyota Aygo, lift the car so you can loosen the bolts securing the front wheels and remove them completely. Once the two wheels are removed, proceed to loosen the bolts securing the gearbox and remove it entirely.

Now, locate the clutch, which should be removed along with the corresponding diaphragm spring; this will allow you to insert the new replacement part, reassemble all components, and check their operation.


Updated on 14 September 2026 by ScegliAuto


Related tutorials

Toyota Aygo (2014-2023 / Ab40, MK 2) Below we will see the main directions that will allow us to disassemble and replace the clutch kit of the Toyota Aygo, as well as of the Citroen C1 a…
Toyota Aygo (2005-2014 / Ab10, MK 1) Today's instructions will allow us to adjust the pedal and clutch cable of the Toyota Aygo, as well as the Peugeot 107 and Citroen C1. First, we open…
Toyota Aygo (2014-2023 / Ab40, MK 2) The instructions below will show you how to adjust the clutch pedal on the Toyota Aygo in simple steps. First, get into the vehicle and check the act…

    Frequently Asked Questions

    • Aygo 2014-2023 - How much does it cost to replace the clutch in a Toyota Aygo? Read answer
    • Aygo 2005-2014 - How much does it cost to replace the Toyota Aygo clutch? Read answer

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos