Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Clutch Disc

Model: Toyota Aygo MK 1, Ab10 - Years 2005-2014
Part: Clutch

Replacing the clutch is a very laborious operation as it is necessary to disassemble the entire clutch assembly. Start by removing the battery and support to work easily on the clutch. Lift the vehicle, secure it, and unscrew the bolts of the clutch cover and all connected parts. Remove the wheel and disassemble the drive shafts. Remove the clutch and disassemble the disc by taking off the fixing nuts. Clean the parts and install the new clutch disc, securing it carefully. Check that other transmission components are not compromised, then reassemble the cover and secure it properly. Reconnect and reassemble all previously removed parts in reverse order. Verify the perfect operation of the replaced component.

Updated on 6 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Aygo (2014-2023 / Ab40, MK 2) Below we will see the main directions that will allow us to disassemble and replace the clutch kit of the Toyota Aygo, as well as of the Citroen C1 a…
Toyota Aygo (2005-2014 / MK 1, Ab10) In order to replace the clutch of the Toyota Aygo, you need to lift the car so that the left front wheel can be removed: after removing the wheel, yo…
Toyota Aygo (2005-2014 / MK 1, Ab10) Today's instructions will allow us to adjust the pedal and clutch cable of the Toyota Aygo, as well as the Peugeot 107 and Citroen C1. First, we open…

Other guides you may be interested in

    Frequently Asked Questions

    • Aygo 2014-2023 - How much does it cost to replace the clutch in a Toyota Aygo? Read answer
    • Aygo 2005-2014 - How much does it cost to replace the Toyota Aygo clutch? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos