Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the front bulbs on a Toyota Aygo

Model: Toyota Aygo Ab10, MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Headlight bulb

See other generations:
Video tutorial

With the engine off and the handbrake engaged, lift the bonnet and secure it. To replace the main beam headlamp, disconnect the connector and unscrew the rubber rear cover, then unclip the metal retaining clip and remove the bulb. Reverse the process for reassembly.

The replacement of the dipped beam bulb is done in the same way. In the video, if needed, you can also observe the procedures for replacing the side indicator bulbs and position lights. If the bulb does not work after replacement, the issue may lie with the fuse.


Updated on 29 April 2026 by ScegliAuto


Related tutorials

Replacement of the rear headlight and bulbs of the Toyota Aygo
Replacement of the rear headlight and bulbs of the Toyota Aygo
Toyota Aygo (2005-2014 / Ab10, MK 1) Below we will see the instructions that will allow us to disassemble and replace the rear light and its bulbs of the Toyota Aygo. First, we open the …
How to Replace the Bulbs on a Toyota Aygo, Specifically the Dipped Beam Bulbs
How to Replace the Bulbs on a Toyota Aygo, Specifically the Dipped Beam Bulbs
Toyota Aygo (2005-2014 / Ab10, MK 1) This guide shows how to replace the bulbs on a Toyota Aygo, specifically the H4 dipped beam bulbs. To carry out the replacement, open the bonnet afte…
Replacement of the rear headlight bulbs of the Toyota Aygo
Replacement of the rear headlight bulbs of the Toyota Aygo
Toyota Aygo (2005-2014 / Ab10, MK 1) The steps outlined in this guide will show us how to disassemble and replace the rear headlight bulbs of the Toyota Aygo. First, we open the rear hat…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos