Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Discs of the Toyota Aygo

Model: Toyota Aygo MK 1, Ab10 - Years 2005-2014
Part: Clutch

This guide outlines the main steps to dismantle and replace the clutch discs of the Toyota Aygo in simple and quick steps. First, lift the vehicle and start draining the engine oil; then disconnect the driveshaft from the gearbox by removing the wheel and disconnecting the driveshaft from the braking system, as illustrated in the video. Next, unscrew the bolts of the gearbox to separate it from the engine, gaining access to the clutch; replace the discs and reassemble everything, following the video to the end!

Updated on 16 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the clutch of the Toyota Aygo
Guide to replacing the clutch of the Toyota Aygo
Toyota Aygo (2014-2023 / Ab40, MK 2) Below we will see the main directions that will allow us to disassemble and replace the clutch kit of the Toyota Aygo, as well as of the Citroen C1 a…
How to Replace the Clutch on the Toyota Aygo 1.0 VVT-I
How to Replace the Clutch on the Toyota Aygo 1.0 VVT-I
Toyota Aygo (2005-2014 / MK 1, Ab10) Below, you will find the procedure and instructions to remove and replace the clutch kit on the Toyota Aygo. First, raise the vehicle and begin by re…
How to adjust the clutch pedal of the Toyota Aygo
Toyota Aygo (2005-2014 / MK 1, Ab10) Today's instructions will allow us to adjust the pedal and clutch cable of the Toyota Aygo, as well as the Peugeot 107 and Citroen C1. First, we open…

Other guides you may be interested in

    Frequently Asked Questions

    • Aygo 2014-2023 - How much does it cost to replace the clutch in a Toyota Aygo? Read answer
    • Aygo 2005-2014 - How much does it cost to replace the Toyota Aygo clutch? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos