Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Toyota Aygo

Model: Toyota Aygo Ab40, MK 2 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Headlight bulb

See other generations:
Video tutorial

Replacing the front headlamp bulb on your Toyota Aygo is a very simple, quick, and intuitive procedure. First, switch off the vehicle, pull the handbrake, and open the bonnet.

You will then have immediate access to the headlamp's electrical connector where the bulb to be replaced is located. It is always advisable to perform these operations using nitrile gloves to avoid leaving greasy substances on the surface of the new bulb, which could lead to overheating and premature failure.

At this point, simply rotate the bulb holder connected to the electrical connector a quarter turn counterclockwise, remove the old bulb, and replace it with the new one.


Updated on 17 May 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on a Toyota Aygo
How to Replace the Front Headlamp Bulb on a Toyota Aygo
Toyota Aygo (2014-2023 / Ab40, MK 2) To replace the front headlamp bulb on a Toyota Aygo, open the bonnet to access the interior of the engine compartment: here you will find the connect…
How do you replace the headlight bulb of the Toyota Aygo?
How do you replace the headlight bulb of the Toyota Aygo?
Toyota Aygo (2005-2014 / Ab10, MK 1) It will be possible to replace the headlight bulb of the Toyota Aygo by opening the hood to access the components located inside the engine compartme…
How to Replace the Front Headlamp Bulb on a Toyota Aygo
How to Replace the Front Headlamp Bulb on a Toyota Aygo
Toyota Aygo (2005-2014 / Ab10, MK 1) To replace the front headlamp bulb on a Toyota Aygo, open the bonnet to access the components in the engine bay. Locate the internal protective cover…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos