Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear lights of the Toyota Aygo

Model: Toyota Aygo MK 1, Ab10 - Years 2005-2014
Part: Tail light bulb

In a few simple steps, we will see the process of disassembling and replacing the rear headlight bulbs of the Toyota Aygo. First, open the rear trunk door and start unscrewing the side screws of the headlight; disconnect the electrical connector of the bulbs to remove it from the outer part, as shown in the video. At this point, separate the bulb holder from the light fixture, replacing any faulty bulbs with new ones; then reassemble the rear headlight, checking the operation of all the bulbs, and securing everything with the screws!

Posted on 30 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the rear light of the Toyota Aygo
How to disassemble the rear light of the Toyota Aygo
Toyota Aygo (2005-2014 / MK 1, Ab10) In this guide, we will see information related to disassembling and replacing the rear taillight and its bulbs of the Toyota Aygo. First, we open the…
Replacement of the rear light of the Toyota Aygo
Replacement of the rear light of the Toyota Aygo
Toyota Aygo (2014-2023 / Ab40, MK 2) In this video tutorial, we will see how to disassemble and replace the rear taillight and its bulbs of the Toyota Aygo. First, we open the rear trunk…
How to Remove the Rear Headlamp on a Toyota Aygo
How to Remove the Rear Headlamp on a Toyota Aygo
Toyota Aygo (2005-2014 / MK 1, Ab10) Do you want to remove the rear headlamp from your Toyota Aygo? Here's how to proceed with the removal: First, open the boot and remove the inspection…

Other guides you may be interested in

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos