Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove a crankshaft on a Toyota Yaris

Model: Toyota Yaris Xp10 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Body

See other generations:
Video tutorial

Let's see how to remove a crank: that thing that was used to lower and raise the windows when electric window lifts did not exist (or when electric window lifts were only available on the front doors). What holds it on the door panel is a small "c" clip, which is usually facing upwards, so we have to push the lever downwards, in order to open up a bit the space located at the top of the crank, and using a plastic spatula, we will pry between the lever and the door body, until we feel the metal clip come out, which we retrieve from below: pull it out and that's it.


Posted on 31 October 2025 by ScegliAuto


Related tutorials

How to Remove the Front Bumper of a Toyota Yaris
How to Remove the Front Bumper of a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Before you start, open the bonnet of your Toyota Yaris. Begin by unscrewing and removing the screws that secure the front bumper to the chassis, loca…
How to Remove the Rear Light Bulb on a Toyota Yaris
How to Remove the Rear Light Bulb on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Before you can start, open the tailgate of your Toyota Yaris. Begin by unclipping the clips that secure the internal cover on the side of the boot. N…
How to remove the rear light of the Toyota Yaris?
How to remove the rear light of the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) To remove the rear light of the Toyota Yaris, open the tailgate to detach the side trim panel of the boot corresponding to the light to be removed. O…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos